Skip Navigation

Kyocera Luno S2100

Congratulations! You are one step closer to loving your new phone.

Now you just need to follow these easy steps:

  1. Attach your battery and charge your phone for 24 hours.
  2. Call 1-800-806-5819 from any phone, and have a pen and paper ready. Bell MTS Customer Care will give you your new phone number and set up your account.
  3. Follow these steps to set up your new Kyocera Luno S2100.

Notes:

  • These instructions only apply to the first time you set up your phone.
  • Perform steps in the order given.
  • The OK button refers to the Center Key located in the middle of the large square dial below the screen.

  1. Turn the phone on by pressing and releasing the red End key.
  2. Enter ##000000 and then press Left Service soft key.
  3. At the programming screen, scroll down to Edit. Hit OK to Select.
  4. At Edit MDN screen, press back key repeatedly to delete existing number (if there is one).
  5. Enter the 10 digit phone number Bell MTS Customer Care gave you and press OK or Done.
  6. At Edit MSID screen, press back key repeatedly to delete existing number (if there is one).
  7. Enter the 10 digit phone number Bell MTS Customer Care gave you and press OK or Done.
  8. Your new phone will restart.
  9. Start using your new phone.

If your phone doesn't work after all these steps are done, please call us at 1-800-806-5819 for help.

Was this page helpful?

How could we improve this page?


Support

Hours of operation