Skip Navigation

SpeedStream 5260

Front Panel Lights / Function

Key Item Function
1 sys

Green - Normal system operation.

Yellow – Power-on self-test in progress (this may take a few minutes).

Red – Power-on self-test error occurred. Power cycle modem, if it persists, replace modem.

Off – Power is off.

2 ATM

Green – Solid: ATM ready, Blinking: ATM cell delineation and traffic flow.

Red – ATM failure.

Off – Power is off, line not yet trained or no ATM cell delineation.

3 DSL

Green - Solid: Line is trained and ready for data traffic. Blinking: Attempting to train line.

Yellow - Line not yet trained, blinking Green / Yellow: searching for far-end signal.

Red - DSL error has occurred. LAN modem is not configured properly.

Off – Power is off. Power on self-test in progress.

4 enet

Green – Solid: Ethernet ready. Blinking: Ethernet traffic flow.

Red - Power-on self-test error occurred. Power cycle modem, if it persists, Contact Us.

Off - Power is off. No Ethernet link detected; check hardware ensure that a straight-through (normal) cable is used.

Rear Panel Function

Key Item Function
1 Switch On/off button to control power to the modem.
2 DSL DSL connection with a phone cord from the phone jack to the modem.
3 10BASE-T Ethernet 10/100 Base-T RJ-45 port, connects to the network card in your computer.
4 Power DC power adapter connector.

Was this page helpful?

How could we improve this page?


Support

Hours of operation